Besides our own line of R&S Advantage doors we offer doors from two other industry leaders, Wayne Dalton and Clopay.

Uninsulated Commercial Garage Doors

Premium-duty 20 gauge and heavy-duty 24 gauge steel non-insulated commercial garage doors offer long lasting dependability and enduring quality that will meet the rigors of daily use.

25 gauge non-insulated steel garage doors are an alternative for applications requiring economy and reliability in a lighter gauge commercial door.

525 2″ thick, 25 ga ribbed steel
524 2″ thick, 24 ga ribbed steel
692 1 1/8″ thick, raised panel wood grain embossed 24 ga steel
520 2″ thick, 24 ga ribbed steel

A Great start to long lasting door solutions. . . .
For areas of high traffic and the possibility of the door being struck, a break away bottom section is available. This section can be hit and reset in seconds maintaining the function of the door and the integrity of the building.

Insulated Commercial Garage Doors

Polyurethane
Climate control. Reliability. Durability. Our premier polyurethane insulated steel commercial garage doors have it all, providing excellent temperature control, energy efficiency and long lasting service for a wide range of applications, such as firehouses, warehouses, and municipal buildings.

Polystyrene
These high quality, polystyrene insulated steel garage doors provide energy efficiency and long service under demanding conditions. Ideal for use in municipal buildings, warehouses and shipping dock applications, or where value and energy efficiency is needed.

Economy
Premium-duty 20 gauge and heavy-duty 24 gauge steel insulated garage doors are for most commercial and industrial applications. 25 gauge insulated steel doors are an alternative for applications requiring economy and reliability in a lighter gauge commercial garage door.

A Great start to long lasting garage door solutions. . . .
For areas of high traffic and the possibility of the door being struck, a break away bottom section is available. This section can be hit and reset in seconds maintaining the function of the door and the integrity of the building.

Commercial Sectional Door Systems

Wayne-Dalton offers more insulation choices for commercial sectional overhead doors, including the highest R-value ratings available in a standard design. Thermospan® Series Doors provide excellence in efficiency, durability, and design

Please note that Wayne-Dalton manufactures a full line of sectional overhead doors, including insulated steel panel doors, uninsulated steel panel doors, glazed aluminum doors, and wood panel doors. Most are available with vision panels or windows.

Thermospan® Models
TS 200-20
TS 150
TS 125

Thermospan® 200-20 Features

Energy efficiency
Thermospan® 200 & 200-20 is a total insulating system, including thermal barrier and joint seals as well as vinyl top seal and bottom astragal-all attached to the door sections. All seals are factory-installed to save installation time and avoid the problems sometimes found on conventional doors due to inadvertent exclusion of seals during installation.

MAXIMUM EFFICIENCY AND OPERATION
Chemical bonding of CFC free polyurethane to steel skins creates a unitized body with superior strength, insulation and dent-resistant characteristics.

HIGH QUALITY MATERIALS
High quality materials are provided with the doors such as hardware plates at all fastener points for added durability and life, hot dipped galvanized steel end caps protect the end of the door and help provide a tight seal against the jambs and graduated hinges and inclined adjustable track assure a snug seal against air infiltration.

VIRTUALLY MAINTENANCE FREE
Thermospan® 200 and 200-20 are virtually maintenance free. They are impact-resistant and feature a pre-painted exterior surface. The interior and exterior skins are hot-dipped, galvanized, structural quality steel is factory finished with baked-on corrosion-resistant primer and white polyester finish coat (brown exterior is available on Thermospan® 200 model).

FACTORY GLAZED WINDOWS 24″ X 6″
The Thermospan® comes with factory installed 1/2″ sealed insulated glass windows mounted in a molded high-impact frame.

Extended limited warranty
Sections are warranted for TEN (10) YEARS against cracking, splitting, or deterioration due to rust-through, and SEVEN (7) YEARS against separation/degradation of foam insulation. TEN (10) YEARS on insulation value.

View product brochure.

Thermospan® 150
“Insulated Sectional Steel Doors”

Thermospan® 150 gives you competitively priced, thermally efficient doors with remarkable insulation values surpassed only by our Thermospan® 200 Model. When you combine this outstanding energy efficiency with an attractive white or brown flush exterior surface, high-strength steel and quiet, smooth operation, you will be glad you chose Thermospan® 150. Standard sizes available up to 26′ wide and 20′ high.
Thermospan® 150 Features

Designed to be Energy-Efficient!
Insulation materials placed between two metal surfaces without a thermal break greatly reduce the effectiveness of the insulation. Generally, the outer surface of conventional steel doors wraps around and becomes a part of the inner door surface. The process used to make Thermospan®150 is different. It begins with two separate skins: one for the inner and another for outer surfaces. These skins are separated along each edge of each section by a thermoplastic material that effectively breaks any contact between inner and outer skins. To assure thermal integrity, seals between all section joints are factory-installed, as are vinyl “bulb” astragals which prevent air infiltration between floor and bottom of doors.

Because of these features, an excellent “U”-value of 0.0706 is achieved. Testing on a conventional insulated steel door resulted in a “U”-value of only 0.233.

Extra Strength
Two integral (1-3/4″ deep) struts are roll-formed into the back skin (inside surface) of each section of Thermospan® 150. This often eliminates the need for externally fixed stiffeners which are often used on the inside of conventional doors. And when Thermospan® 150’s cavity is filled with polyurethane, the struts are filled as well, making for an extremely strong, yet lighter weight door.

Virtually maintenance free
A Thermospan® 150 door is virtually maintenance-free. If damage occurs – or if other than routine maintenance is required – inside face hardware, tracks and springs are standard parts used industry-wide. This means they’re readily available and generally are stocked by most independent commercial/industrial door distributors. Also, with Thermospan® 150, heavy-duty, hot-dipped galvanized hinges and tracks are standard.

Both the interior and exterior skins of hot-dipped galvanized steel are factory finished with baked on primer and polyester finish coats.

Thanks to the thermal break and joint seal, the inside surface of the door remains close to room temperature, eliminates condensation (and/or frost) which may lead to corrosion of inside face hardware.

Optional windows
Windows can be specified for the Thermospan® 150 flush doors. The standard option is 1/2″ sealed insulated glass mounted in a molded high impact polymer frame. An additional option includes 1/4″ glass, acrylic and polycarbonate windows

Extended limited warranty
Sections are warranted for TEN (10) YEARS against cracking, splitting, or deterioration due to rust-through, and SEVEN (7) YEARS against separation/degradation of foam insulation.

View product brochure.

Thermospan® 125

“Thermal efficiency, durability and design make this the door of choice when a low-cost, high quality door is desired!”
Thermospan® 125 is a cost-effective alternative to our Thermospan® 200 and Thermospan® 150 models. The thermal efficiency, durability and design of the Thermospan® 125 make it the door of choice when a low-cost, high quality door is desired!

Thermospan® 125 Features

Maximum efficiency and operation
Chemical bonding of CFC free polyurethane to steel skins creates a unitized body with superior strength, insulation and dent-resistant characteristics.

Energy efficiency
The polyurethane core is surrounded by hot-dipped galvanized steel skins providing insulating efficiency. The Thermospan 125 has a R-value of 10.79. A bulb-shaped vinyl astragal provides added protection against air and water infiltration.

High quality materials
The Thermospan® 125 is manufactured with high quality materials including heavy-duty, hot dipped galvanized hinges and track. In addition, 18 gauge hot-dipped galvanized steel end caps offer interior hinge attachment surface and exterior leg for proper seal against the jamb.

Window options
Windows can be specified for the Thermospan® 125 doors. The glass is set in molded high-impact resistant polymer frames.

Panel option
The pin stripes (grooves) and pebble finish on the outer skin not only add strength but also enhance the appearance of the door.

Specifications and Drawings
Wayne-Dalton offers specifications and full technical support for our commercial products. For further information please visit our product solution center.

Extended limited warranty
Sections are warranted for TEN (10) YEARS against cracking, splitting, or deterioration due to rust-through, and SEVEN (7) YEARS against separation of polyurethane from the steel skin of the panel.

View product brochure.

Besides our own line of R&S Advantage doors we offer doors from three other industry leadersand Clopay, Windsor Republic and Wayne Dalton

Clopay has taken the garage door from functional to fashionable. With over 1,000 different designs, in wood, steel, composite, wrought iron and glass, you’re sure to find the perfect style to transform your garage… and your home.
The Portfolio™ Line offers many unique designs and materials to enhance your home’s curb appeal. Choose either wood, steel or composite carriage house style garage doors from our Reserve, Coachman, Grand Harbor.

The Gallery™ Collection offers grooved steel vintage designs at a more affordable price. For a contemporary look, choose from the Avante™ Collection which combines durable aluminum and glass in sleek modern designs.

The popular Classic™ Line of steel raised and flush panel garage doors will complement most home styles. Add one of many decorative window choices to create a custom look.

Avante	Coachman	Gallery	Grand Harbor	Reserve
Classic Wood	Premium	Value Plus	Value

Carriage Style Doors

Model 770
Timeless Classic Design

Standard Features:

• 23 Standard designs
• Custom designs available
• Insulated with thick, CFC-Free polystyrene foam bonded between the front and back steel skins with 5/16” thick vinyl board overlay
• R-value 6.3
• Three color choices for the sections and boards (Polar White, Almond or Sandstone) which can be mixed to complement your home
• Four window designs
• Optional decorative black wrought iron hardware to enhance the carriage style appearance
• Flush steel interior gives the door a finished, clean appearance
• Tongue and groove joint construction seals and aligns the sections for a snug, weathertight fit
• Full-width bottom vinyl weatherseal fits tight against floors sealing out moisture, light and energy leaks
• Limited Lifetime Warranty

Deep Embossed Panel Designs

Windsor Republic offers 6 panel designs so you can choose the look that is right for your home. From the timeless raised panel design to the elegant steel carriage design, all Windsor Republic panel designs are deeply embossed into the steel for maximum curb appeal.

Please choose a panel below for available models:

Raised Panel Design	Ranch Panel Design	Classic Raised Panel Design
Flush Panel Design	Steel Carriage Design	Ribbed Design

Model 8000 Garage Doors

“The traditional steel garage door for traditional and contemporary homes.”
If you have a garage that does not affect the look or insulation value of your home, you may want this basic, uninsulated garage door

Download pdf for panel and color information.

Model 9100 Garage Doors

“Safety, beauty and durability make our 9100 Model America’s most popular garage door.”
A Wayne-Dalton Model 9100 garage door offers safety, beauty, and durability at the most affordable prices for steel doors. Chosen by homeowners for its strength, durability, and gracious design, the Model 9100 door is backed by a Lifetime Limited warranty for many years of worry-free dependability.

Download pdf for panel and color information.

Model 9600 Garage Doors

“Our most attractive value in a garage door.”
A Wayne-Dalton Model 9600 Garage Door offers the most options at affordable prices, adding style and curb appeal to your home. Chosen by homeowners for their insulating value, durability, gracious looks, and safety design, Model 9600 doors are backed by a Lifetime Limited warranty for many years of worry-free dependability.

Download pdf for panel and color information.

Royal -Tempered Glass
Aeroflex – Perforated Steel
Impact- Polycarbonate
Global – Opaque Solid
Concept 1212 – Open Style

Besides offering our own aluminum grilles manufactured by R&S Manufacturing, Inc. we can supply, install and maintain a full range of industry leading grille manufacturers including Dynamic Closures, Inc. and Accordian Doors, Inc.

Royal

Tempered Glass
This high performance tempered glass model offers excellent visibility and exceptional protection. Perfect for banks and stores, or any other location requiring both maximum visibility and secure closing.

Aeroflex

Perforated Steel
Breathe easy with AEROFLEX micro perforated steel panels. This model combines the transparency of glass with the strength of steel for good-looking protection.

Imact

Polycarbonate
Highly Resistant, Surprisingly Light.
Polycarbonate panels provide remarkable impact-resistance in a surprisingly light package. The panels are 1.6 mm (1/16″) thick and have no horizontal joints.

Global

Opaque Solid
Protection from Prying Eyes.
Total protection from prying eyes! With its full-height aluminum panels, this model is totally opaque. Ideal for banks, automatic teller machines, warehouses, reception rooms, etc.

Concept 1212

Open Style
Proven Security… and Cost-effectiveness
This attractive, open style model stands out for its ruggedness. It can be used in many settings including schools, food fairs, stadiums, hospitals, warehouses, etc.

R&S offers high-speed and high-performance doors for industrial, commercial, pharmaceutical and cold-storage environments from industry leaders Rytec and TNR Doors.

The Only USDA-Compliant High-Speed Roll Door

The Clean-Roll door is the only high-speed roll door designed specifically to meet the most comprehensive and stringent hygienic standards in the world – a combination of USDA, FDA, NSF and ISO standards.

All of the door’s components are fabricated of stainless steel or USDA compliant materials. Designed to allow complete washdown and includes many more sanitary design features that make it the natural choice for applications that demand absolute cleanliness. Plus, it provides all the low-maintenance, energy savings and productivity benefits of a high-speed door.

Sanitary Design
Classified by Underwriter’s Laboratories (UL® 2128) to meet USDA hygienic standards for meat, poultry, dairy and seafood applications. The entire door is washdown – yet its sanitary design prevents liquid contaminants from dripping into the traffic pathway and virtually eliminates potential sites for germ manifestation.

Takes a Hit
Clean-Set™, Break-Away™ tabs allow bottom bar to be reset without tools in just seconds, virtually eliminating door downtime.

Energy Efficient
High speed operation conserves energy and
maintains constant climate control while helping to minimize infiltration of airborne pathogens.

Safety
Pneumatic, dual-chamber reversing edge and thru-beam
photo eyes.
Standard
Rytec’s System 3® door controller

The Industry’s Most Popular High-Speed, Break-Away™ Door.
A Product of the Year award-winner, the PredaDoor® rolling door is the most popular high-speed door in the country. That’s because its simple, direct drive operation and supreme reliability have enabled it to be applied successfully in a vast array of applications. And today, the addition of the System 3® controller, with its integrated variable speed AC Drive system for soft acceleration and braking, makes it more dependable and durable than ever.

Plus, the PredaDoor® offers the added safety and versatility of full-width replaceable window panels or optional screen panels. For general applications, it’s the best value in the business.

Fast
Opens at up to 50 inches per second for improved traffic flow.

Safety
Full-width, replaceable PVC window panel (or optional screen
panel) for great visibility. Standard features include reversing edge in
bottom bar and two electric photo eyes.

Takes a Hit
Quick-Set,™ Break-Away™ tabs allow bottom bar to be reset without tools in just seconds, virtually eliminating door downtime.

Low Profile
Only 6-1/4 inches of side clearance and 3-3/4 inches of side column projection required. Fits virtually anywhere.

Wind Resistance
Integral panel connecting ribs provide resistance to wind and negative pressure. Also allows for quick, inexpensive replacement of all panel sections. Optional rigid, 2-ply or 3-ply Rilon™ available for high wind exterior applications.

Tight spaces call for The Turbo-Seal Door. Where traffic patterns near doorways are tight and high speed is critical, the Turbo-Seal® ultra high-speed door is your best solution.

Such situations tend to create greater potential for doors to get hit because of the relatively short approach to the door, which in some cases forces equipment to enter the door at an angle. The extra speed (up to 100 inches per second) offered by the Turbo-Seal minimizes that potential by getting the door out of the way faster. And even if it does get hit, it can be reset without tools in just seconds.

Fast
Opens at up to 100 inches per second.

Safety
Dual electric photo eyes and pneumatic, dual-chamber reversing edge in bottom bar are standard. Optional, replaceable windows for visibility.

Takes a Hit
Quick-Set,™ Break-Away™ tabs allow bottom bar to be reset without tools in just seconds,virtually eliminating door downtime.

Low Profile
Side columns are only 8 inches wide with 6 inches of projection. Fits virtually anywhere.

Low Maintenance
Dual guided counterweights help ensure smooth, maintenance-free operation.

Easy Installation
Modular construction and pre-wiring allow for quick installation.

Examples of Applications: Manufacturing Process and Maintenance Buildings in: mining, petroleum, military, agriculture, pulp & paper and steel.

• Suitable for applications up to 20 feet in width or height
• Self-supporting steel mounting angle
• Knock-away double angle steel bottom bar for 10lb/ft with rubber loop
• Manual chain hoist
• Counterbalance spring assembly cycle rating of 50,000

Examples of Applications: Manufacturing Process and Maintenance Buildings in: mining, petroleum, military, agriculture, pulp & paper and steel.

• Suitable for applications up to 20 feet in width or height
• Self-supporting steel mounting angle
• Knock-away double angle steel bottom bar for 10lb/ft with rubber loop
• Frame mounted thru-beam photoelectric sensor
• Heavy duty gear operator with push button controls open, close, stop
• Door speed of up to 18 inches per second
• Counterbalance spring assembly cycle rating of 100,000

Examples of Applications: manufacturing, food processing, automotive, bus transit stations, parking garages, postal, airports and railways.

• Suitable for applications up to 20 feet in width or height.
• Self-supporting steel mounting angle
• Knock-away double angle steel bottom bar for 10lb/ft with rubber loop and reversing edge
• Frame mounted thru-beam photoelectric sensor
• High Efficiency Heligear Head (HG) Operator with multi-function PLC panel
• Door speed of up to 30 inches per second
• Counterbalance spring assembly cycle rating of 100,000

Examples of Applications: manufacturing, food processing, automotive, bus transit stations, parking garages, postal, airports and railways.

• Suitable for applications up to 20 feet in width or height.
• Self-supporting steel mounting angle
• Knock-away double angle steel bottom bar for 10lb/ft with rubber loop and reversing edge
• Frame mounted thru-beam photoelectric sensor
• High Efficiency Heligear Head (HG) Operator with multi-function PLC panel
• Soft Start Soft Stop using Inverter technology
• Door speed of up to 60 inches per second
• Counterbalance spring assembly cycle rating of 100,000

Examples of Applications: manufacturing, food processing, automotive, bus transit stations, parking garages, postal, airports and railways.

• Suitable for applications up to 20 feet in width or height.
• Self-supporting steel mounting angle
• Knock-away double angle steel bottom bar for 10lb/ft with rubber loop and reversing edge
• Frame mounted thru-beam photoelectric sensor
• High Efficiency Heligear Head (HG) Operator with multi-function PLC panel
• Soft Start Soft Stop using Inverter technology
• High Range RPM motor
• Door speed of up to 30 inches per second
• Springless with direct connect inertia brake mounted on drive barrel shaft

Introducing a springless low-headroom rubber roll-up door designed for use in underground parking applications for condos, office complexes, hotels and airports to name a few.

This high performance door is best suited for any application where head room clearance is a concern. Maximum door width is 25’ 0” and maximum door height is 10’ 0” with a minimum requirement of 18” head room clearance.

It is designed to take full impacts with little or no downtime and is easily reset from the floor without the use of special tools or parts.

The Model HDP includes a high-efficiency helical gear head operator with a multi-function capacity PLC (programmable logic circuit) and offers door speeds up to 30 inches per second.

Examples of Applications: heavy manufacturing, steel, pulp & paper, waste management, oil & gas and mining.

• Suitable for applications beyond 40 feet in width and up to 35 feet in height.
• Self-supporting steel mounting angle
• Knock-away double angle steel bottom bar for 10lb/ft with rubber loop and reversing edge
• Frame mounted thru-beam photoelectric sensor
• High Efficiency Heligear Head (HG) Operator with multi-function PLC panel
• Door speed of up to 20 inches per second
• Counterbalance spring assembly cycle rating of 50,000

Examples of Applications: heavy manufacturing, steel, pulp & paper, waste management, oil & gas and mining.

• Suitable for applications beyond 40 feet in width and up to 35 feet in height.
• Self-supporting Channel steel C10 & flatbar mounting assembly
• Knock-away double angle steel bottom bar for 15lb/ft with rubber loop and reversing edge
• Frame mounted thru-beam photoelectric sensor
• High Efficiency Heligear Head (HG) Operator with multi-function PLC panel
• Door speed of up to 12 inches per second
• Counterbalance spring assembly cycle rating of 50,000

This light-weight high-speed roll-up door is suitable for many applications such as environmental separation, distribution centers and manufacturing facilities to name a few. Its compact size (both in terms of height and width), enables trouble-free installation even when there are space restrictions.

Curtain material is available in standard blue, orange, red and clear PVC. It has a wide range of safety features such as failsafe reversing edge, counterbalanced emergency access/egress mechanism (available on both sides of door), Nema-4 external electronic control panel and two (2) guide mounted photocells as reversing devices.

*Please Note: 

We carry fire rated vision panels for both metal and wood doors by TGP. See their site.

SteelCraft B Series Door above

Flush Frames: see their site

• F16 and F14-Series Flush Frames – Heavy/Extra-Heavy Duty Commercial and Institutional
• F18-Series Flush Frames – Light Duty Commercial
• F12-Series Flush Frames – Maximum Duty Commercial and Institutional
• FN16 and FN14-Series Flush Frames – Heavy/Extra-Heavy Duty Commercial and Institutional
• FN18-Series Flush Frames – Light Duty Commercial
• FE16 and FE14-Series Double Egress Frames – Heavy/Extra-Heavy Duty Commercial and Institutional
• DE16 and DE14-Series Double Egress Frames – Clear Width Corridor Application
  Heavy/Extra-Heavy Duty Commercial and Institutional

Please Note: Hollow Metal Window Systems of any size can be fabricated.

Simpson

Exterior Doors Mastermark® Collection American Red Oak Mahogany Collection ViewSaver® TDL Doors Builder’s Advantage® Collection Selects Series Performance Series® Craftsman Collection Bungalow Series™ Texas Star Doors Wrought Iron Doors Impact-Resistant Doors Primed Package Advent® Collection Infinity Doors Encore® Doors Redi-Prime® Doors Interior Doors Decorative French

nterior Doors Chalkboard Panel Doors American Red Oak Knotty Pine Doors Maple Doors Cherry Doors Shaker Series Primed Package Advent® Collection Infinity Doors Encore® Doors Redi-Prime® Doorssee their site

Wood Door Specialties

Buell Doors Architectural 5ply
American Door
Haley Doors Architectural
Commercial
Residential
Molded Panel & Legacy Doors

Wood Door Specialties offers an inventory of architectural and commercial, plain sliced red oak and rotary natural birch in sizes of 6’8″, 7’0″, 8’0″ and 9’0″. Wood face veneer is available along with plastic laminate. Several standard colors as well as custom matching services are also offered.

We also custom make doors to match any hinge layout.

Schlage

Catalog

Hager

Tubular Commercial Locks – Lever – 3600

Falcon B Series Locks  product cut sheet	Best Access  9K Heavy Duty Locks-Levers product cut sheet  other models also available see their site

Cal Royal
all product lines offered
see their site

Don Jo 
models offered: 71 push plate & 7115 4 x 16 stainless steel pull plate
product cut sheet

R&S provides and installs restroom Don Jo signage as well as accessories from Brobrick and ASI including paper towel dispensers, toilet paper holders, hand dryers, tampon dispensers, waste receptacles, baby changing tables and mirrors.

Signage

Don Jo
models offered: chs-1 | chs-2 | chs-3 | hs9070-01 | hs 9070-05 | hs9070-32
product cut sheet

Accessories

From ASI and Bobrick R&S offers the following restroom accessories:

• paper towel dispensers
• toilet paper holders
• hand dryers
• tampon dispensers
• waste receptacles
• baby changing tables
• mirrors

Asi
full product catalog

Bobrick
full product catalog

Besides our own line of R&S Advantage doors we offer doors from two other industry leaders, Wayne Dalton and Clopay.

Uninsulated Commercial Garage Doors

Premium-duty 20 gauge and heavy-duty 24 gauge steel non-insulated commercial garage doors offer long lasting dependability and enduring quality that will meet the rigors of daily use.

25 gauge non-insulated steel garage doors are an alternative for applications requiring economy and reliability in a lighter gauge commercial door.

525 2″ thick, 25 ga ribbed steel
524 2″ thick, 24 ga ribbed steel
692 1 1/8″ thick, raised panel wood grain embossed 24 ga steel
520 2″ thick, 24 ga ribbed steel

A Great start to long lasting door solutions. . . .
For areas of high traffic and the possibility of the door being struck, a break away bottom section is available. This section can be hit and reset in seconds maintaining the function of the door and the integrity of the building.

Insulated Commercial Garage Doors

Polyurethane
Climate control. Reliability. Durability. Our premier polyurethane insulated steel commercial garage doors have it all, providing excellent temperature control, energy efficiency and long lasting service for a wide range of applications, such as firehouses, warehouses, and municipal buildings.

Polystyrene
These high quality, polystyrene insulated steel garage doors provide energy efficiency and long service under demanding conditions. Ideal for use in municipal buildings, warehouses and shipping dock applications, or where value and energy efficiency is needed.

Economy
Premium-duty 20 gauge and heavy-duty 24 gauge steel insulated garage doors are for most commercial and industrial applications. 25 gauge insulated steel doors are an alternative for applications requiring economy and reliability in a lighter gauge commercial garage door.

A Great start to long lasting garage door solutions. . . .
For areas of high traffic and the possibility of the door being struck, a break away bottom section is available. This section can be hit and reset in seconds maintaining the function of the door and the integrity of the building.

Commercial Sectional Door Systems

Wayne-Dalton offers more insulation choices for commercial sectional overhead doors, including the highest R-value ratings available in a standard design. Thermospan® Series Doors provide excellence in efficiency, durability, and design

Please note that Wayne-Dalton manufactures a full line of sectional overhead doors, including insulated steel panel doors, uninsulated steel panel doors, glazed aluminum doors, and wood panel doors. Most are available with vision panels or windows.

Thermospan® Models
TS 200-20
TS 150
TS 125

Thermospan® 200-20 Features

Energy efficiency
Thermospan® 200 & 200-20 is a total insulating system, including thermal barrier and joint seals as well as vinyl top seal and bottom astragal-all attached to the door sections. All seals are factory-installed to save installation time and avoid the problems sometimes found on conventional doors due to inadvertent exclusion of seals during installation.

MAXIMUM EFFICIENCY AND OPERATION
Chemical bonding of CFC free polyurethane to steel skins creates a unitized body with superior strength, insulation and dent-resistant characteristics.

HIGH QUALITY MATERIALS
High quality materials are provided with the doors such as hardware plates at all fastener points for added durability and life, hot dipped galvanized steel end caps protect the end of the door and help provide a tight seal against the jambs and graduated hinges and inclined adjustable track assure a snug seal against air infiltration.

VIRTUALLY MAINTENANCE FREE
Thermospan® 200 and 200-20 are virtually maintenance free. They are impact-resistant and feature a pre-painted exterior surface. The interior and exterior skins are hot-dipped, galvanized, structural quality steel is factory finished with baked-on corrosion-resistant primer and white polyester finish coat (brown exterior is available on Thermospan® 200 model).

FACTORY GLAZED WINDOWS 24″ X 6″
The Thermospan® comes with factory installed 1/2″ sealed insulated glass windows mounted in a molded high-impact frame.

Extended limited warranty
Sections are warranted for TEN (10) YEARS against cracking, splitting, or deterioration due to rust-through, and SEVEN (7) YEARS against separation/degradation of foam insulation. TEN (10) YEARS on insulation value.

View product brochure.

Thermospan® 150
“Insulated Sectional Steel Doors”

Thermospan® 150 gives you competitively priced, thermally efficient doors with remarkable insulation values surpassed only by our Thermospan® 200 Model. When you combine this outstanding energy efficiency with an attractive white or brown flush exterior surface, high-strength steel and quiet, smooth operation, you will be glad you chose Thermospan® 150. Standard sizes available up to 26′ wide and 20′ high.
Thermospan® 150 Features

Designed to be Energy-Efficient!
Insulation materials placed between two metal surfaces without a thermal break greatly reduce the effectiveness of the insulation. Generally, the outer surface of conventional steel doors wraps around and becomes a part of the inner door surface. The process used to make Thermospan®150 is different. It begins with two separate skins: one for the inner and another for outer surfaces. These skins are separated along each edge of each section by a thermoplastic material that effectively breaks any contact between inner and outer skins. To assure thermal integrity, seals between all section joints are factory-installed, as are vinyl “bulb” astragals which prevent air infiltration between floor and bottom of doors.

Because of these features, an excellent “U”-value of 0.0706 is achieved. Testing on a conventional insulated steel door resulted in a “U”-value of only 0.233.

Extra Strength
Two integral (1-3/4″ deep) struts are roll-formed into the back skin (inside surface) of each section of Thermospan® 150. This often eliminates the need for externally fixed stiffeners which are often used on the inside of conventional doors. And when Thermospan® 150’s cavity is filled with polyurethane, the struts are filled as well, making for an extremely strong, yet lighter weight door.

Virtually maintenance free
A Thermospan® 150 door is virtually maintenance-free. If damage occurs – or if other than routine maintenance is required – inside face hardware, tracks and springs are standard parts used industry-wide. This means they’re readily available and generally are stocked by most independent commercial/industrial door distributors. Also, with Thermospan® 150, heavy-duty, hot-dipped galvanized hinges and tracks are standard.

Both the interior and exterior skins of hot-dipped galvanized steel are factory finished with baked on primer and polyester finish coats.

Thanks to the thermal break and joint seal, the inside surface of the door remains close to room temperature, eliminates condensation (and/or frost) which may lead to corrosion of inside face hardware.

Optional windows
Windows can be specified for the Thermospan® 150 flush doors. The standard option is 1/2″ sealed insulated glass mounted in a molded high impact polymer frame. An additional option includes 1/4″ glass, acrylic and polycarbonate windows

Extended limited warranty
Sections are warranted for TEN (10) YEARS against cracking, splitting, or deterioration due to rust-through, and SEVEN (7) YEARS against separation/degradation of foam insulation.

View product brochure.

Thermospan® 125

“Thermal efficiency, durability and design make this the door of choice when a low-cost, high quality door is desired!”
Thermospan® 125 is a cost-effective alternative to our Thermospan® 200 and Thermospan® 150 models. The thermal efficiency, durability and design of the Thermospan® 125 make it the door of choice when a low-cost, high quality door is desired!

Thermospan® 125 Features

Maximum efficiency and operation
Chemical bonding of CFC free polyurethane to steel skins creates a unitized body with superior strength, insulation and dent-resistant characteristics.

Energy efficiency
The polyurethane core is surrounded by hot-dipped galvanized steel skins providing insulating efficiency. The Thermospan 125 has a R-value of 10.79. A bulb-shaped vinyl astragal provides added protection against air and water infiltration.

High quality materials
The Thermospan® 125 is manufactured with high quality materials including heavy-duty, hot dipped galvanized hinges and track. In addition, 18 gauge hot-dipped galvanized steel end caps offer interior hinge attachment surface and exterior leg for proper seal against the jamb.

Window options
Windows can be specified for the Thermospan® 125 doors. The glass is set in molded high-impact resistant polymer frames.

Panel option
The pin stripes (grooves) and pebble finish on the outer skin not only add strength but also enhance the appearance of the door.

Specifications and Drawings
Wayne-Dalton offers specifications and full technical support for our commercial products. For further information please visit our product solution center.

Extended limited warranty
Sections are warranted for TEN (10) YEARS against cracking, splitting, or deterioration due to rust-through, and SEVEN (7) YEARS against separation of polyurethane from the steel skin of the panel.

View product brochure.

R&S offers high-speed and high-performance doors for industrial, commercial, pharmaceutical and cold-storage environments. Each door offered addresses specific operational and environmental requirements.

Rytec Clean-Roll®

The Only USDA-Compliant High-Speed Roll Door

The Clean-Roll door is the only high-speed roll door designed specifically to meet the most comprehensive and stringent hygienic standards in the world – a combination of USDA, FDA, NSF and ISO standards.

All of the door’s components are fabricated of stainless steel or USDA compliant materials. Designed to allow complete washdown and includes many more sanitary design features that make it the natural choice for applications that demand absolute cleanliness. Plus, it provides all the low-maintenance, energy savings and productivity benefits of a high-speed door.

Sanitary Design
Classified by Underwriter’s Laboratories (UL® 2128) to meet USDA hygienic standards for meat, poultry, dairy and seafood applications. The entire door is washdown – yet its sanitary design prevents liquid contaminants from dripping into the traffic pathway and virtually eliminates potential sites for germ manifestation.

Takes a Hit
Clean-Set™, Break-Away™ tabs allow bottom bar to be reset without tools in just seconds, virtually eliminating door downtime.

Energy Efficient
High speed operation conserves energy and
maintains constant climate control while helping to minimize infiltration of airborne pathogens.

Safety
Pneumatic, dual-chamber reversing edge and thru-beam
photo eyes.
Standard
Rytec’s System 3® door controller

Rytec Predadoor®

The Industry’s Most Popular High-Speed, Break-Away™ Door.
A Product of the Year award-winner, the PredaDoor® rolling door is the most popular high-speed door in the country. That’s because its simple, direct drive operation and supreme reliability have enabled it to be applied successfully in a vast array of applications. And today, the addition of the System 3® controller, with its integrated variable speed AC Drive system for soft acceleration and braking, makes it more dependable and durable than ever.

Plus, the PredaDoor® offers the added safety and versatility of full-width replaceable window panels or optional screen panels. For general applications, it’s the best value in the business.

Fast
Opens at up to 50 inches per second for improved traffic flow.

Safety
Full-width, replaceable PVC window panel (or optional screen
panel) for great visibility. Standard features include reversing edge in
bottom bar and two electric photo eyes.

Takes a Hit
Quick-Set,™ Break-Away™ tabs allow bottom bar to be reset without tools in just seconds, virtually eliminating door downtime.

Low Profile
Only 6-1/4 inches of side clearance and 3-3/4 inches of side column projection required. Fits virtually anywhere.

Wind Resistance
Integral panel connecting ribs provide resistance to wind and negative pressure. Also allows for quick, inexpensive replacement of all panel sections. Optional rigid, 2-ply or 3-ply Rilon™ available for high wind exterior applications.

Rytec Turbo Seal®

Tight spaces call for The Turbo-Seal Door. Where traffic patterns near doorways are tight and high speed is critical, the Turbo-Seal® ultra high-speed door is your best solution.

Such situations tend to create greater potential for doors to get hit because of the relatively short approach to the door, which in some cases forces equipment to enter the door at an angle. The extra speed (up to 100 inches per second) offered by the Turbo-Seal minimizes that potential by getting the door out of the way faster. And even if it does get hit, it can be reset without tools in just seconds.

Fast
Opens at up to 100 inches per second.

Safety
Dual electric photo eyes and pneumatic, dual-chamber reversing edge in bottom bar are standard. Optional, replaceable windows for visibility.

Takes a Hit
Quick-Set,™ Break-Away™ tabs allow bottom bar to be reset without tools in just seconds,virtually eliminating door downtime.

Low Profile
Side columns are only 8 inches wide with 6 inches of projection. Fits virtually anywhere.

Low Maintenance
Dual guided counterweights help ensure smooth, maintenance-free operation.

Easy Installation
Modular construction and pre-wiring allow for quick installation.

R&S offers DYNACO industrial rapid roll-up doors, fabric roll-up doors, high-speed roll-up doors.

DYNACO delivers a unique “patented push pull doors” concept offering the safest, fastest, best sealing roll up doors, with the lowest maintenance cost in the industry. DYNACO rapid roll up doors are crash-forgiving and automatically re-inserting.

M2

For Doors Less than 18′ Wide:
M2 Basic DoorsFor inside and outside environments.Typical Applications: Distribution Manufacturing Production Areas	Freezer M2 -22°F DoorsDesigned for interior and exterior environments where cold storage with negative temperatures to as low as –22°F are required.The freezer doors come with an automatic cycle mode to maintain door operation in freezer applications. The control box should be mounted on the warm side, but optional cold side mounting is available. Works in temperatures of up to -22 degrees Maximum standard dimensions 15’ x 15’ opening Operating speed: 96” per second opening, 48” per second closing Curtain made of reinforced PVC vinyl Heated side guides Burner unit available to minimize condensation and moisture Infrared photocell in side guides Soft bottom edge Pneumatic bottom edge detector Designed for interior or exterior cold storage, freezers, or processing to freezers
Power M2 DoorsFor inside and outside environments.Typical Applications: Manufacturing Production Areas Transportation Distribution Automotive
All Weather M2 DoorsFor outside environments exposed to high winds andother weather extremes.Typical Applications: Exterior Openings Openings Exposed to High Winds and Harsh Environments Areas with Extreme Pressure Differentials	Stainless Steel M2 DoorsFor environments requiring frequent cleaning and excellent sealing.Typical Applications: Agricultural Food Industry Hygienically Sensitive Applications Wash Down Areas Corrosive Environment
Clean Room M2 DoorsFor inside environments requiring clean room class contamination control.Typical Applications: Pharmaceutical Electronic Hospitals Laboratories Controlled Environments

M3

For Doors 18′ and Wider:
Power M3 DoorsFor inside and outside environments.Typical Applications: Manufacturing Production Areas Transportation Distribution Automotive	All Weather M3 DoorsFor outside environments exposed to high winds and other weather extremes.Typical Applications: Exterior Openings Openings Exposed to High Winds and Harsh Environments Areas with Extreme Pressure Differentials

Clean Room Door D-311-CL LF

For an inside environment type clean room, that demand a limitation of the leak flow. Self-repairing & sound-proof operation (BEAD technology). DYNACO Low Friction System. Optionally available in stainless steel. Maximum dimensions: 4000 mm x 4000 mm. Opening speed: 1,2 m/s – closing speed : 0,5 m/ s

R&S provides complete pre-engineered steel building systems from several industry leading manufacturers in the assurance that our clients are given a diverse set of solutions for a variety of construction needs. Pre-engineered buildings offer cost-effective solutions for an array of applications.

Steel building systems have been successfully used with outstanding results in a full range of structural needs including:

Mansard Roofing Temporary Field Offices Schools Offices Warehouses Churches Manufacturing Facilities Fire Stations Auto Dealerships Mini Storage Facilities

These systems support lower maintenance costs, easy future expansion, reduced energy usage, fast-track construction schedules and clear-span requirements. R&S has experience in all types of metal building work from simple repairs to complete design-build projects.

R&S offers building packages and services including, but not limited to: Retrofit / Re roof Canopies / Mansards Architectural Metal Roofing Complete Design – Build Projects Component Sales Special Contractor Services Metal Building Repairs

We would like to talk to you about your building needs and plans. Please contact us – our Metal Building Team is ready to assist you. (800) 660-0484

R&S can repair your damaged metal buildings including siding, roofing and skylights.

Before

After

Hollow Metal Doors and Door Frames are an industry standard in commercial, industrial and institutional construction projects. Metal pass doors combine durability with economy providing a reliable and long lasting solution.

R&S is a UL Label Shop providing products in the following categories by industry leaders such as SpecialLite, Mesker Door and Republic Door.

• Rated & Non Rated Doors & Frames
• Temperature Rise Doors
• Metal Doors
• Metal Frames
• Wood Doors
• Solid Core, Natural Finish or Clear Epoxy Doors
• Aluminum Frames – Wilson Partitions 487S

Please note: anything not in stock can be ordered with most hardware delivered within 2-3 days. Standard lead time on orders is 5-7 business days* unless otherwise specified. We are a UL Label Shop and custom is our specialty.

* Custom orders may require a longer lead time depending on materials and quantity ordered.

Schlage

Catalog

Hager

Tubular Commercial Locks – Lever – 3600

Falcon B Series Locks  product cut sheet	Best Access  9K Heavy Duty Locks-Levers product cut sheet  other models also available see their site

Cal Royal
all product lines offered
see their site

Don Jo 
models offered: 71 push plate & 7115 4 x 16 stainless steel pull plate
product cut sheet

R&S is a UL Certified Shop offering custom in-house doors and frames as well as hollow metal doors from both Mesker Door and Republic Door.

Mesker products meet or exceed all Steel Door Institute (SDI) and Architectural Design Specifications. Mesker is approved for fire rated labeling with UL, WHI and FM.

Republic honeycomb doors are available in a complete range of fire ratings (20 minute up to 3 hours) and are certified under both Underwriters Laboratories and Warnock Hersey/ITS. Mesker also offers Temperature Rise/Mineral Fiberboard – Mineral fiberboard capable of withstanding a maximum of 250° temperature rise in 30 minutes. U-Factor of .26

Please Note: SpecialLite doors and frames are offered under our Store Front section.

Our In-house team can work with you to construct custom pass doors of just about any size or configuration.

R&S offers metal pass doors by Mesker Door. We are confident in offering these products to our customers because Mesker’s commitment to quality is evident in all Mesker product lines including commercial, industrial and institutional metal doors and frames. Each product meets or exceeds all Steel Door Institute (SDI) and Architectural Design Specifications.

Mesker Door offers a complete line of hollow metal doors in face sheet gauges ranging from 20 to 14. Doors are typically made of cold rolled steel or galvanized steel. All are insulated as standard with fully bonded, durable polystyrene cores (urethane, honeycomb and fiberboard are also available).

The door line consists of the standard N Series (non handed door) , Six-Panel , Steel Stiffened,Wood grain , 14 Gauge and Bullet Resistant. The combined durability and economy of these doors make them an outstanding choice for all of your hollow metal needs.

N Series

• CLOSER REINFORCEMENT: Every N Series door is furnished with a closer reinforcement box.
• EXTRA LONG LIFE: The key to the N-Series sag resistance is the extra long 3/16 hinge reinforcement.
• YOUR CHOICE OF FOUR CORES: Polystyrene, Honeycomb, Urethane, and Fiberboard.
• LOCK REINFORCEMENT: Thye N Series Door can be prepared for Govt. 161 cylindrical locks with a 2 3/4 backset (ANSI A115.2 lock front), or a Govt. 86 mortise lock with a 2 3/4 backset (ANSI A115.1 lock front.) N Series Doors are also available prepped for sectional trim, panic and electric devices.
• HEMMED EDGE: The hemmed edge of the N Series door offers an extra smooth transition between faces.
• UNIVERSAL HANDING: N Series Doors fit both right and left hand openings, due to the double hole pattern and reversible filler plate.

Republic offers a complete line of standard and specialty hollow metal doors to fit your architectural needs. Republic doors are available in 20, 18, 16, & 14 gauge cold rolled and galvanized steel. All doors come with a ¾” cell honeycomb core as standard, providing every door with a smoother, flatter, and stronger door. Republic honeycomb doors are available in a complete range of fire ratings (20 minute up to 3 hours) and are certified under both Underwriters Laboratories and Warnock Hersey/ITS. All doors are manufactured from stretcher level quality steel and are thoroughly cleaned and phosphatized inside and out offering excellent corrosion resistance and paint adhesion.

Optional Door Cores

• Polystyrene (Solid Core) – 1 lb density expanded polystyrene per ASTM 578 U-Factor of .13
• Polyurethane (Solid Core) – 2 lf density polyurethane per ASTM C591 U-Factor of .10
• Steel Stiffened – Vertical hat shaped stiffeners of 20, 18, and 16 gauge with mineral wool or fiberglass batting between stiffeners. Stiffeners are welded maximum of 6″ apart and on 5″ centers.
• Temperature Rise/Mineral Fiberboard – Mineral fiberboard capable of withstanding a maximum of 250° temperature rise in 30 minutes. U-Factor of .26

DM Series Full Flush Doors

Republic’s DM series doors are available in 18 or 20 gauge cold rolled steel or galvanized (A60) steel. Republic´s “McKenzie Edge” lock edge is continuously lap seam welded and planished, providing a near seamless appearance – SDI levels 1 and 2 – Physical performance level A.

Features

• 1 ¾” (44.4) full flush design, rated for light to extra heavy-duty use
• ¾” (19) cell honeycomb core 100% bonded to skins to provide exceptional strength and flatness
• Hinge edge is non-beveled and reinforced with a full height 16 gauge steel channel projection welded at a maximum of 5″ on center with an additional 9 gauge reinforcement plate at each hinge location, providing more than 3/16″ (5) of total reinforcement
• 16 gauge flush top and inverted bottom channels projection welded to both skins every 2 ½” on center
• Doors are prepared for 4 ½” standard or heavy weight, full mortise template hinges
• Non-handed design (square lock edge)
• Come standard with 1 ½ hour mylar Underwriters Laboratories fire label
• Doors are thoroughly cleaned, phosphatized, and primed with a coat of force cured rust inhibiting primer that meets and/or exceeds the requirements of ANSI A250.10 (120 hour continuous salt spray test per ASTM B117 and 240 hour continuous humidity test per ASTM D4585)
• Doors are individually packaged and fully plastic wrapped to prevent damage

Available Options

• 14 gauge closer reinforcement (standard option)
• 12 gauge closer reinforcement
• A60 galvanized steel
• Finish paint (Republic standard and custom colors)
• Standard cylindrical or mortised lock hardware

DM Series Technical Specs

DL Series Full Flush Doors

Republic’s DL series doors are available in 16, 18, and 20 gauge cold rolled steel or galvanized (A60) steel. Face sheets are continuously projection welded to hinge and lock channels on 5” centers. SDI Levels 2 and 3 – Physical performance level A.

Features

• 1 ¾” (44.4) full flush design, rated for light to extra heavy-duty use
• ¾” (19) cell honeycomb core 100% bonded to skins to provide exceptional strength and flatness
• Hinge edge is non-beveled and reinforced with a full height 16 gauge steel channel projection welded at a maximum of 5″ on center with an additional 9 gauge reinforcement plate at each hinge location, providing more than 3/16″ (5) of total reinforcement
• 16 gauge flush top and inverted bottom channels projection welded to both skins every 2½” on center
• Lock edge is non-beveled and reinforced with a continuous 16 gauge channel, mortised and cylindrical lock reinforcements are integral 16 gauge reinforcements
• Doors are prepared for 4½” standard or heavy weight, full mortise template hinges
• Non-handed design (square lock edge)
• Come standard with 1½ hour mylar Underwriters Laboratories fire label
• Doors are thoroughly cleaned, phosphatized, and primed with a coat of force cured rust inhibiting primer that meets and/or exceeds the requirements of ANSI A250.10 (120 hour continuous salt spray test per ASTM B117 and 240 hour continuous humidity test per ASTM D4585)
• Doors are individually packaged and fully plastic wrapped to prevent damage

Available Options

• 14 gauge closer reinforcement (standard option)
• 12 gauge closer reinforcement
• A60 galvanized, G90 galvanized, or textured wood-grain or leather-grain steel
• Continuously welded seamless design or filled seamless design
• Lock edge beveled 1/8″ in 2″
• Polystyrene, mineral fiberboard, and polyurethane core
• 20, 18, or 16 gauge vertical steel stiffeners (20 gauge standard)
• Sizes available: Minimum 1′0″ (305) x 1″0″ (305), Maximum 5″0″ (1524) x 10″0″ (3048)
• Finish paint (Republic standard and custom colors)

DL Series Technical Specs

DE Series Full Flush Doors

Republic’s DE series doors are available in 14, 16, 18, and 20 gauge cold rolled steel or galvanized (A60) steel. Face sheets are continuously projection welded to hinge and lock channels on 5” centers. SDI Levels 1, 2, 3 and 4 – Physical performance level A, B, C, D.

Features

• 1¾” (44.4) full flush design, rated for light to extra heavy-duty use
• ¾” (19) cell honeycomb core 100% bonded to skins to provide exceptional strength and flatness
• Hinge edge is non-beveled and reinforced with a full height 10 gauge steel channel projection welded at a maximum of 5″ on center
• 16 gauge flush top and inverted bottom channels projection welded to both skins every 2½” on center
• Lock edge is non-beveled and reinforced with a continuous 14 gauge channel, mortised and cylindrical lock reinforcements are integral 14 gauge reinforcements
• Doors are prepared for 4½” standard or heavy weight, full mortise template hinges
• Non-handed design (square lock edge)
• Doors are thoroughly cleaned, phosphatized, and primed with a coat of force cured rust inhibiting primer that meets and/or exceeds the requirements of ANSI A250.10 (120 hour continuous salt spray test per ASTM B117 and 240 hour continuous humidity test per ASTM D4585)
• Doors are individually packaged and fully plastic wrapped to prevent damage

Available Options

• 14 gauge closer reinforcement (standard option)
• 12 gauge closer reinforcement
• A60 galvanized, G90 galvanized, or textured wood-grain or leather-grain steel
• Continuously welded seamless design or filled seamless design
• Lock edge beveled 1/8″ in 2″
• Polystyrene, mineral fiberboard, and polyurethane solid cores
• 20, 18, or 16 gauge vertical steel stiffeners (20 gauge standard)
• Sizes available: Minimum 1″0″ (305) x 1″0″ (305), Maximum 5″0″ (1524) x 10″0″ (3048)
• Finish paint (Republic standard and custom colors)

DE Series Technical Specs

DL Series Embossed Panel Doors

Commercial Steel Door Performance with Decorative Panel Designs
Republic offers a wide variety of embossed panel insulated doors such as our traditional 6-panel design, 8′ 6-panel design with elongated panels, 2-panel colonial design, 4 panel, and 8 panel designs. Doors are available in 18, and 20 gauge cold rolled steel or galvanized (A60) steel. Face sheets are continuously projection welded to hinge and lock channels on 5″ centers. SDI Levels 2 and 3 – Physical performance level A

Features

• 1¾” (44.4) design, rated for light to extra heavy-duty use
• Polystyrene core (1 pound density) 100% bonded to skins to provide exceptional insulation, strength, and flatness
• Hinge edge is non-beveled and reinforced with a full height 16 gauge steel channel projection welded at a maximum of 5″ on center with an additional 9 gauge reinforcement plate at each hinge location, providing more than 3/16″ (5) of total reinforcement
• 16 gauge flush top and inverted bottom channels projection welded to both skins every 2½” on center
• Lock edge is non-beveled and reinforced with a continuous 16 gauge channel, mortised and cylindrical lock reinforcements are integral 16 gauge reinforcements
• Doors are prepared for 4½” standard or heavy weight, full mortise template hinges
• Non-handed design (square lock edge)
• Come standard with 1½ hour Mylar Underwriters Laboratories fire label
• Doors are thoroughly cleaned, phosphatized, and primed with a coat of force cured rust inhibiting primer that meets and/or exceeds the requirements of ANSI A250.10 (120 hour continuous salt spray test per ASTM B117 and 240 hour continuous humidity test per ASTM D4585)
• Doors are individually packaged and fully plastic wrapped to prevent damage

Available Options

• 14 gauge closer reinforcement (standard option)
• 12 gauge closer reinforcement
• A60 galvanized, or textured wood-grain (wood grain embossed are available as prime painted only – factory stain not available)
• Continuously welded seamless design or filled seamless design
• Lock edge beveled 1/8″ in 2″
• Sizes available: Minimum 2′6″ x 6′8″, Maximum 3′8″ x 7′2″ (20 gauge available in 3070 or smaller only)
• 4″ hinges (square edge only)
• Half glass light kits (limited sizes available)
• Finish paint (Republic standard and custom colors)

Embossed Technical Specs

DM and DL Series UNIFIT™ Replacement Doors

Republic′s Unifit™ series doors are available in 16, 18, and 20 gauge cold rolled steel or galvanized (A60) steel. Face sheets are continuously projection welded to hinge channels on 5″ centers. SDI Levels 2 and 3 – Physical performance level A

Feature

• 1¾” (44.4) full flush design, rated for light to extra heavy-duty use
• ¾” (19) cell honeycomb core 100% bonded to skins to provide exceptional strength and flatness
• Hinge edge is non-beveled and reinforced with a full height 10 gauge steel channel projection welded at a maximum of 5″ on center. Hinge channel depth is set at .190 and can be used for heavy or standard weight hinges
• 16 gauge flush top and inverted bottom channels projection welded to both skins every 2½” on center
• Lock edge is non-beveled and reinforced with a continuous 16 gauge channel (DL series), mortised and cylindrical lock reinforcements are integral 16 gauge reinforcements
• Non-handed design (square lock edge)
• Doors are thoroughly cleaned, phosphatized, and primed with a coat of force cured rust inhibiting primer that meets and/or exceeds the requirements of ANSI A250.10 (120 hour
• continuous salt spray test per ASTM B117 and 240 hour continuous humidity test per ASTM D4585)
• Doors are individually packaged and fully plastic wrapped to prevent damage

Available Options

• 14 gauge closer reinforcement (standard option)
• 12 gauge closer reinforcement
• A60 galvanized, G90 galvanized, or textured wood-grain
• Polystyrene, mineral fiberboard, and polyurethane core
• 20, 18, or 16 gauge vertical steel stiffeners (20 gauge standard)
• Sizes available: Minimum 1′0″ (305) x 1′0″ (305), Maximum 5′0″ (1524) x 10′0″ (3048)

UNIFIT™ Technical Specs