Mini Storage Sheet Doors

Sheet doors offer quick installation, ease of maintenance and are a dependable, economical alternative to traditional service doors.

DBCI

Self-Storage Doors : 650 Series

sheet_dbci_650

The 650 is the best choice for an easy operatable and low maintenance door, which features shielded steel radial bearings on both support brackets. The DBCI tension bracket allows quick, safe, inexpensive and unlimited adjustments to the door.

DBCI doors use the WeatherX coating system, which is recognized for its remarkable color and gloss retention, as well as its superior chalk resistance. It allows DBCI doors to endure the physical abuses from manufacturing, transit and installation while minimizing cracking.

Curtain
26-gauge, Grade E hard steel, 5/8” deep ribbed corrugation
20 standard colors, special colors available upon request
Wash coat over primer on interior side
30-year film integrity warranty, up to 25-year chalk and fade warranty
Two stainless steel latches, either padlock style or cylinder style, or the cast Zinc Apex latch
Apex latch: Limited pry points, rust resistant* and magnetic alarm compatible
All latches accept double locks and 7/16” shackles
Rain lip note: For proper exterior door installation, a 1 ½” deep rain lip must be formed in the concrete slab, extending a minimum of 3 ½” from the interior face of the jamb.

Bottom Bar

6063 – T6 aluminum extrusion
1 ½” x 1 ½” galvanized angles to provide structural stability, security and increased wind load resistance
Bulb astragal, replaceable vinyl
weather seal

Axle-Drum Assembly
14-gauge 1 5/16” O.D. steel axle
18-gauge 9 ½” drums
Oil-tempered e-coated torsion springs, available in two springs upon request from 7’ to 10’ wide
Fully accessible springs for inspection and maintenance

Guides
18-gauge galvanized steel guides
Pre-punched holes for anchors, slide latch, bracket attachment and head stop attachment
Polyethylene guide strips provide easy, quiet operation

Hardware
12-gauge head stops have slotted mounting holes for proper attachment
14-gauge galvanized steel handles
12-gauge tension bracket made for additional strength; shielded radial bearings for smooth operation; worm gear adjusting design allows for unlimited adjusting positions
12-gauge bearing bracket on left side

Options
Insulation 651 Series
Top and side draft stop

Commercial Doors: 2000 Series

sheet_dbci_commercial2000

The 2000 Series is the right choice for light-duty applications requiring frequent usage such as warehouses, freight terminals, car washes, machine shops, auto body shops and much more. The 16-gauge, 12” drums allow for easy retraction. These doors are low-maintenance, which is what every owner wants in a quality door. DBCI’s commercial-grade steel curtain roll-up doors are designed to meet and/or exceed operational requirements for commercial doors with little or no maintenance.

Curtain
26-gauge galvanized, Grade E hard steel
Deep ribbed corrugation
Maximum opening size of 12’ x 18’
Siliconized polyester WeatherX paint over prime coat
20 standard colors, special colors upon request with upcharge
Wash coat over primer interior side
30-year film integrity warranty, up to 20-year chalk and fade warranty
Improved flexible wear strips

Bottom Bar
6063-T6 aluminum extrusion
2” x 1 ½” galvanized angles
Bulb astragal
Stainless steel nuts and bolts

Axle-Drum Assembly
Utilizes 12”, 16-gauge drums
1 5/16” O.D. steel axle, 14-gauge
Oil tempered torsion springs
Steel ball bearings
26-gauge full top sheet

A.C.E. Guide System
Advanced Curtain Engagement guide system
Galvanized steel
Adjustable bolt on head stop
Polyethylene wear strip
Pre-punched for lock and attachment fasteners

Hardware
13-gauge saddle clamps
10-gauge slide locks; two per door
16-gauge step plate; two per door
¼” steel welded angle T-bracket

Options
Insulation 2250 Series
Chain hoist 4:1 reduction
Vision panels (17” x 5”)
Top draft stop
Hood
Steel mounting plates
Electric operator
Low headroom 1900 Series

Commercial Doors: 2500 Series

sheet_dbci_commercial2500

The 2500 Series is DBCI’s heavy duty steel curtain roll-up door with tremendous versatility and unmatched quality. The 2500 Series has deep engagement guides creating greater durability and stronger, longer lasting performance. DBCI’s commercial-grade steel curtain roll-up doors are designed to meet and/or exceed operational requirements for commercial doors with little or no maintenance.

Curtain
26-gauge galvanized, Grade E hard steel
Deep ribbed corrugation
Maximum opening size of 18’ x 18’
Siliconized polyester WeatherX paint over prime coat
20 standard colors, special colors upon request with upcharge
Wash coat over primer interior side
30-year film integrity warranty, up to 20-year chalk and fade warranty
Flexible wear strips

Bottom Bar
6063-T6 aluminum extrusion
2” x 1 ½” galvanized angles
Bulb astragal (Durometer 75)
Stainless steel nuts and bolts

Axle-Drum Assembly
Utilizes 12”, 16-gauge drums
1 8/16” O.D. steel axle, 14-gauge
Oil tempered torsion springs
Steel ball bearings in drums
26-gauge full top sheet

A.C.E. Guide System
Advanced Curtain Engagement guide system
Galvanized steel
Adjustable bolt on head stop
Polyethylene wear strip
Pre-punched for lock and attachment fasteners

Hardware
13-gauge saddle clamps
10-gauge slide locks; two per door
16-gauge step plate; two per door
¼” steel welded angle T-bracket

Options
Insulation 2750 Series
Chain hoist 4:1 reduction
Vision panels (17” x 5”)
Top draft stop
Hood
Steel mounting plates
Electric operator
Low headroom 2400 Series

Porvene

Porvene’s 200 Series sheet doors are the “Original sheet Door” introduced into the United States in the 1960’s. Its ease of operation and economical price has made it an industry standard within the construction industry. This product can be insulated, Windlocked™ and built with a pass door. This complete product line is available depending on size, as Hand Operation or Chain Operation and can be upgraded to Electric Operation.

sheet_porvene231Standard Items:

  • Greaseless Nylon Bearings: This exclusive feature delivers longer life than metal bearings, without costly maintenance.
  • Drum Assembly: The counter balancing mechanism is housed in this unique, roll-up assembly.
  • Lock Seam: The sections are lock seamed together. If one section is damaged beyond repaired, it can be easily replaced.
  • Weather Seal: A blade astragal made from E.P.D.M., a highly resilient and flexible rubber compound, runs the full length of the bottom angle to seal the threshold of the opening. This forms a barrier against weather, dirt, insects and rodents.
  • Guides: Roll formed single piece guide standard on all doors.
  • Chain Operation: Smooth hand-chain provides safe and comfortable operation eliminating the sharp edges common to lock link hand chain.
  • Locking Assembly: Exclusive tamper-proof slide bolt lock accommodates two padlocks for double protection.
  • Galvanized Steel Curtain: A continuous sheet of .021” galvanized steel delivers maximum security.

Optional Items:

  • Vision Lites
  • Vents
  • Screened Vents
  • Wicket Doors
  • Electric Operators
  • Electric Sensing Edge
  • Electric Interlocks
  • Weatherseal
  • Steel Building Plates

Download Brochure